Rev. 00 08/17
MagicControl 4.0 (CM40)
Maintenance / Repairs
67
SD card
– data backup
The contents of the SD card can be saved on another medium in order to
be able to copy them back in case of card damage or data loss. Further
information can be found in the "Technical Manual".
Some operating systems do not display individual files. This is
often the case with “autoexec.bat” files, for example.
– When copying the data, make sure that all data is visible and
copied.
– If in doubt, contact your IT department.
Inserting the SD card:See chapter "Inserting the SD card" on page 26.
Powder output/powder hose correction
The settings in the following example are carried out for each
gun individually!
Powder output corrections are made at the first start-up, after a service
work, after the solution of application problems, or by using different hose
diameters!
It is recommended to create a table with input fields (see "Example table
for powder output/powder hose correction"), so that, if a possible system
reset takes place, an access to these data can take place.
Powder output correction
– procedure
1.
Press the
key
The following page is displayed:
Fig. 66:
2.
Press the
key
The following page is displayed:
Содержание MagicControl 4.0
