Rev. 00 03/22
OptiFeed BigBag (FPS16)
Product description
•
15
Product description
Intended use
The fresh powder system is a powder feeding system and is suited for the
conveying of the coating powder from the large containers (Big Bag) to
the powder coating plant (powder hopper/powder center). The powder
supply takes place continuously from the large container and in
accordance to the consumption in the coating plant. The powder transport
is automatically switched on and off by messages from the level sensor in
the powder container. The powder is aspirated in pulses by a vacuum,
and subsequently transported with conveying air.
The fresh powder system will also operate in combination with the
OptiFeed PP07 powder pump or other Gema models with suitable
connections. Please contact Gema if you have any further queries.
Fig. 1
CAUTION
The use of the equipment must take place in the area defined for it!
Содержание FPS16
