GM1137
22
Revision Date: 02/13/2015
Technical Support
Firmware Version
The firmware version is located in the upper right section of the web interface header, represented
by v1.y.xx. Before contacting support, it is recommended that the Watchdog 15 unit first be
updated to the latest firmware version. If this is not possible, please have the unit’s existing
firmware version number available when contacting technical support.
Figure 20: Web Page Header
Firmware Updates
Keep your unit updated with the latest firmware releases or sign up for notifications at the following
website: http://geistglobal.com/support/monitor/firmware.
Resetting the Unit
Should the Watchdog 15 unit loose communication; the processor may be manually rebooted by
removing power momentarily from the unit. To restore the default IP address, press the reset
button located beside the network connector and hold for approximately 20 seconds. Both the idle
and activity lights near the network connector will both light up when the IP address has been reset.
Service and Maintenance
No service or maintenance is required. Do not attempt to open the unit or you may void the
warranty. No serviceable parts inside.
More Technical Support
http://www.geistglobal.com
(800) 432-3219
Email: [email protected]
Or contact your distributor.
