GEIGER RADIO SYSTEMS
Sunshade controls
Twilight sensor
GF0029
Operating instructions
1. Switch sensor on and off
Press key
ON
for 3 seconds.
w
The
green
LED flashes 3 times
w
The sensor is
switched on
Press key
OFF
for 3 seconds.
w
The
red
LED flashes 3 times
w
The sensor is
switched off
2. Programming of radio code
Press both keys for
3 seconds
w
Red
and
green
LEDs flash alternately
w
The program mode is active for
20 seconds
As shown on the picture and within 20 seconds
hold the transmitter close to the
GF0029
and
press one transmitter key.
w
The
green
LED lights up once
w
The radio code is successfully learned
You can now program the GF0029 in the receiver, according to the operating instructions of your
controller. By briefly pressing the ON key, a sensor signal can be sent manually.
3. Function test
The curtain has to be in the upper end position in order to carry out the function test.
Briefly press the
ON
key
w
The
green
LED lights up once / the curtain moves downwards
Now briefly press the
OFF
key
w
The
red
LED lights up once / the curtain moves up again
The function test is completed. If the curtain is in the upper end position, the GF0029 will move it
automatically downwards every day at dusk (threshold 40 lx).
OF
F
ON
OF
F
ON
red LED
green LED
