Gehl R135, Руководство оператора

Страница: 150 / 206

146 50940193/DP0415
Hydraulic Hose Maintenance
Hydraulic hoses and connections must be
inspected by a trained technician before the first
use of the machine, and at least annually thereafter, for leaks and/or
damage.
Leakages and damaged pressure hose/lines must be immediately
repaired or replaced by an authorized service center.
Never use your hands to check for suspected hydraulic leaks. Always
use a piece of wood or cardboard.
Leaks from hydraulic hoses or pressurized components can be difficult
to see, but pressurized oil can have enough force to pierce the skin and
cause serious injury.
Obtain immediate medical attention if pressurized oil pierces the skin.
Failure to obtain prompt medical assistance could result in gangrene or
other serious damage to tissue.
Always relieve hydraulic system pressure before performing any
maintenance on the machine. Do not tighten leaking connections when
the hydraulic system is under pressure.
Never weld or solder damaged or
leaking pressure lines and/or screw
connections. Always replace
damaged hydraulic components.
Hydraulic hoses must be replaced
every six years from the date of
manufacture, even if they do not
appear damaged. The date of
manufacture (month or quarter and
year) is indicated on hydraulic
hoses. See Figure 111.
WARNING
Figure 111 – Hydraulic Hose
Manufacture Date
1 Q/05