Gehl CTL60, Руководство оператора, Страница: 48 / 170

46
CONTROLS
Switches
Float Switch
WARNING
¡ ¡
¡ ¡ ¡
Make sure the bucket is lowered to the
ground before putting the lift arms in
the Float position. Putting the lift arms
in the Float position while they are
raised will cause the bucket to fall and
is extremely dangerous.
¡ ¡
¡ ¡ ¡
Do not drive the loader forward with
the lift arms in the Float position.
This switch sets the lift arms to the Float
position. The lift arms are put to the Float
position while this switch is pressed in. When
the switch is released, the Float position is
canceled.
When in the Float position, the bucket can
follow the level of the ground without
movement of the control lever.
Starter Switch
IMPORTANT: Do not repeatedly switch
the key from OFF to ON and ON to OFF
over a short period. Doing so will cause
engine breakdown.
PREHEAT ..... Position for preheating the
engine.
OFF .............. Position for stopping the
engine and inserting or
removing the key.
ON ................ Position in which the engine
is running. At this position, all
the electrical equipment is
functional.
START .......... Position for starting the engine.
When the key is released, the
switch automatically returns to
the ON position.
Horn Switch
Press the switch on the right control lever to
blow the horn.
PREHEAT
START
ON
OFF
E4B010
If Equipped
T9B009
If Equipped
T9B010