Gehl CTL60, Руководство оператора, Страница: 130 / 170

128
MAINTENANCE
When Required
Lubricating the Levers
WARNING
Set the machine to the parking posture,
stop the engine, remove the starter key
and store it. Failure to do so may result
in the machine moving abruptly, leading
to serious injury or death.
If the levers or pedal no longer move
smoothly, supply grease.
Control levers
1. Remove the lower mount section of the
boot (1) and turn it upwards.
2. Wipe off the old grease.
3. Supply grease to points (A) and (B).
4. Set the boot (1) back as it was.
Auxiliary pedal
1. Remove the lower mount section of the
boot (1) and turn it upwards.
2. Wipe off the old grease.
3. Supply grease to points (A) and (B).
4. Set the boot (1) back as it was.
Inspecting and Replenishing the
Windshield Washer Fluid
Use a windshield washer fluid designed
specifically for motor vehicles. Follow the
instructions including with the washer fluid.
Inspection
1. Open the front door.
2. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishment
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer fluid.
3. Reinstall the cap (2).
E4G058
1
A
B
T7G027
B
A
B
1
2
1
G4G030