gefran G-Vision 67-070, Руководство по эксплуатации

Страница: 15 / 24

15 81086_G-Vision 67_12-2021_ENG
Use a shielded CAT 5 cable or higher
Note: Ensure that the power supply has enough power
capacity for the operation of the equipment.
The unit must always be grounded to earth with shielded
CAT 5 cable. Grounding helps limit the effects of noise due to
electromagnetic interference on the control system.
The earth connection can also be made using the screws
located near the connector. A label helps identify the ground
connection.
All the electronic devices in the control system must be
properly grounded. Grounding must be performed according
to applicable regulations.
6. POWER SUPPLY, GROUNDING AND SHIELDING
The power supply terminal block is shown in the figure below.
Fig. 6.1