gefran G-Vision 67-070, Руководство по эксплуатации

Страница: 13 / 24

13 81086_G-Vision 67_12-2021_ENG
4.2. Installation Environment and procedure
Avoid prolonged exposition to direct sunlight to avoid the risk
of overheating the device.
The equipment is not intended for installation in contact with
corrosive chemical compounds. Check the resistance of the
front panel to a specific compound before installation.
Do not use tools of any kind (screwdrivers, etc.) to operate
the touch screen of the panel.
The IP67 is guaranteed only if:
• max deviation from the plane surface to the cut-out: O0.5mm
• thickness of the case where is mounted the equipment:
from 1,5mm to 6mm
• max surface roughness where the gasket is applied: O120
um
D Usable cable
Max 3mm GV_R-CAV-POE4-USB1.5
Max 10mm Standard Ethernet
CAUTION
Tightening torque: 1000Ncm for nut, 130Ncm
for screws
4.3. Safety instruction
For all installation notes, please refer to the
Installation Guide provided with the product.