gefran ADV200 WA, Описание функций и список параметров

Страница: 77 / 300

ADV200 WA • Functions description and parameters list
77
21 – FV PARAMETERS
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
21.1 2400 Voltage flux boost perc FLOAT 0.0 0.0 15.0 RWS V
Setting of the boost voltage. The resistive impedance of the stator windings causes a voltage drop within the
motor, which results in a reduction in torque in the lower speed range. This effect can be compensated by
boosting the output voltage. If self-tuning is performed, the boost value is calculated automatically.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
21.2 2402 Voltage boost gain V/A FLOAT 0.0 0.0 0.0 ERWS V
Manual setting of the voltage boost gain to apply to the motor terminals for the set V/f characteristic curve. If
self-tuning is performed, the boost value is calculated automatically.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
21.3 2404 Voltage torque boost ENUM Disable 0 1 ERWZ V
Enables vector torque compensation. The default drive setting is to pure V/f control.
0 Disable
1
Enable
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
21.4 2406 Vf voltage V FLOAT CALCF 10.0 690.0 ERWZS V
Setting of the maximum voltage value to be applied at the motor terminals (usually set according to the motor data plate).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
21.5 2408 Vf frequency Hz FLOAT CALCF 10.0 2000.0 ERWZS V
Setting of the motor rated frequency (indicated on the motor data plate)
This is the frequency at which the drive output voltage reaches the maximum output voltage (
Vf voltage ) on
the motor.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
21.6 2410 Vf voltage 1 V FLOAT CALCF CALCF CALCF ERWZS V
Setting of an intermediate voltage value for the custom V/f characteristic curve.