gefran ADV200 WA, Описание функций и список параметров

Страница: 63 / 300

ADV200 WA • Functions description and parameters list
63
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.3 1808 Analog out 1 scale FLOAT 1.0 -10.0 10.0 RW VS
15.4 1810 Analog out 2 scale FLOAT 1.0 -10.0 10.0 RW VS
Parameter for setting a multiplier factor of the signal of the relative analog output. It can be used to amplify or
reduce the input value of the relative analog output block.
1
2
3
+10V
-10V
0V
Internal V
1
2
3
Par. 1808 (1810) = 1
Par. 1808 (1810) = 0,5
Par. 1808 (1810) = -1
Stp Var x par. 1808 (1810)
Vout = 10 x
( )
FS Var
where:
Vout
output voltage on the card terminals.
Stp Var actual value of the variable (variable unit)
SF Var full scale of the variable (variable unit)
Example of calculation of scale factor Analog out x scale
To display the drive speed, use an analog instrument with field of measurement from 0...2V. This means that,
to display the speed of the drive, a voltage of 2V on the analog output of the drive must correspond to the
maximum speed. With a scale factor equal to 1 a voltage of 10V would correspond to the maximum speed.
With a scale factor equal to 0.2 = 2V/10V a voltage of 2V would correspond to the maximum speed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.5 1816 Analog out 1 mon cnt INT16 0 0 0 ER VS
The value of the actual voltage present on analog output 1 is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.6 1818 Analog out 2 mon cnt INT16 0 0 0 ER VS
The value of the actual voltage or current present on analog output 2 is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
15.7 1824 An out 1 absolute ENUM Disable 0 1 ERW VS
15.8 1826 An out 2 absolute ENUM Disable 0 1 ERW VS
Enables the relative analog output as an absolute value. If this parameter is set to 1 the voltage on the analog
output assumes the value of 0 - 10V regardless of the sign of the command signal.
0 Disable
1 Enable