gefran ADV200 WA, Описание функций и список параметров

Страница: 37 / 300

ADV200 WA • Functions description and parameters list
37
9 – JOG FUNCTION
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
9.1 910 Jog setpoint rpm INT16 0 CALCI CALCI RW VS
The reference for Jog mode operation. This reference can also be set via an analog input. The
Jog
refer-
ence is enabled when the signal used for the Jog + or Jog – command is enabled, the Run command is not
present and the drive output frequency is zero.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
9.2 912 Jog acceleration s FLOAT 5.0 0.01 1000.00 RW VS
9.3 914 Jog deceleration s FLOAT 5.0 0.01 1000.00 RW VS
Setting of the acceleration/deceleration ramp time (in seconds) used during Jog operation.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
9.4 916 Jog cmd + src LINK 16 6000 0 16384 RW VS
Selection of the origin (source) of the Jog + function enabling signal. When this command is enabled it gener-
ates a Jog Mode reference with a sign matching the value entered for the Jog setpoint value parameter. The
signal to be associated with this function can be selected from the “ L_DIGSEL2 ” selection list.
Note !
The Run command has priority over the Jog + command.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
9.5 918 Jog cmd - src LINK 16 6000 0 16384 RW VS
Selection of the origin (source) of the Jog - function enabling signal. When this command is enabled the Jog
Mode reference sign is inverted with respect to the value entered in the Jog setpoint value parameter. The
signal to be associated with this function can be selected from the “ L_DIGSEL2 ” selection list.
Note !
The Run command has priority over the Jog - command.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
9.6 920 Jog output mon rpm INT16 16/32 0 0 0 ER VS
The speed reference used by the Jog command is displayed.