gefran ADV200 WA, Описание функций и список параметров, Страница: 148 / 300

148
ADV200 WA • Functions description and parameters list
Setting of the integral gain of the PID 2 controller.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.5 7658 PID 2 I time s FLOAT 60.0 0.0 3600.0 RW VS
Setting of the integral time of the PID 2 controller.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.6 7660 PID 2 D time s FLOAT 0.0 0.0 1.0 RW VS
Setting of the derivative time of the PID 2 controller.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.7 7664 PID 2 filter s FLOAT 0.0 0.0 10.0 RW VS
Setting of the time constant used for the PID 2 output filter.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.8 7668 PID 2 limit pos perc FLOAT 100.0 0.0 200.0 RW VS
Setting of the positive limit of the PID 2 controller output.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.9 7670 PID 2 limit neg perc FLOAT 0.0 -200 0.0 RW VS
Setting of the negative limit of the PID 2 controller output.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.10 7672 PID 2 I limit perc FLOAT 100.0 0.0 200.0 RW VS
Setting of the limit of the PID 2 controller part.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.11 7674 PID 2 fbk scale FLOAT 1.0 -10.0 10.0 RW VS
Setting of a multiplier factor to apply to the feedback used by the PID 2 controller.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.12 7676 PID 2 out perc INT16 16/32BIT 0 0 0 R VS
The PID 2 controller reference value output is displayed (this parameter is usually connected to the ramp
block input).
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.2.13 7678 PID 2 fbk tune min PID1U FLOAT 0.0 0.0 0.0 RW VS
Setting of the minimum value for the feedback signal during the autotuning procedure.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.14 7680 PID 2 fbk tune max PID1U FLOAT 100.0 0.0 0.0 RW VS
Setting of the maximum value for the feedback signal during the autotuning procedure.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.15 7682 PID 2 fbk tune thr 1 perc FLOAT 0.10 0.00 10 ERW VS
Autotuning is interrupted (error 25) if the feedback signal does not reach the set value (expressed as a per-
centage of full-scale) within three minutes after the start of the autotuning procedure.
Menu PAR Description UM Typo FB BIT Def Min Max Acc Mod
26.4.16 7684 PID 2 fbk tune thr 2 perc FLOAT 20.00 1.00 100.00 ERW VS