gefran ADV200 WA, Описание функций и список параметров, Страница: 130 / 300

130
ADV200 WA • Functions description and parameters list
0
Ignore
1 Warning
2 Disable
3
Stop
4 Fast stop
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.53 7702 Broken belt torque perc FLOAT 0.0 0.0 100.0 RW VS
Setting of the percentage by which the torque must fall below the rated value for the alarm to be activated.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.54 7704 Broken belt delay s UINT16 30 1 3600 RW VS
Setting of the delay after which the Broken belt alarm is activated. If the conditions causing this alarm return
to normal before the end of the set time, the alarm is not activated.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.55 7706 Broken belt spd thr rpm INT16 100 0 CALCI RW VS
Setting of the threshold value below which the alarm is not activated.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.56 7710 End curve activity ENUM Warning 0 4 RW VS
Setting of the behaviour of the drive if the End curve alarm is present. If the feedback measured (e.g. pres-
sure) stays below the reference value, with a programmable tolerance, for a programmable time and with the
pump at maximum speed, an end of curve alarm is generated. This may indicate a leak in the system.
0 Ignore
1
Warning
2 Disable
3 Stop
4 Fast stop
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.57 7712 End curve ref thr perc INT16 0 0 100 RW VS
Setting of the speed threshold (as a percentage of Full scale speed (PAR 680, menu 5 REFERENCES)
which, if maintained with a feedback signal that is lower than the set value, the End curve alarm is generated.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.58 7714 End curve delay s UINT16 30 1 3600 RW VS
Setting of the delay after which, if conditions remain unchanged, the End curve alarm is activated.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.59 7720 Dry pump activity ENUM Warning 0 4 RW VS
Setting of the behaviour of the drive if the Dry pump alarm is present. The Dry pump alarm is activated with
the No flow alarm if the power delivered is below the threshold calculated for the minimum power curve. The
motor must also be running at maximum speed. This is because if the pump is dry, there is no pressure in the
system and the PID will increase to maximum speed.
0 Ignore
1
Warning
2 Disable
3 Stop
4 Fast stop