page | 13
Operating the Booster for HDMI with EDID Detective
Using the EQ Switch
Due to the high data rates supported by the booster over long cables, video artifacts
and/or drop-outs may occur. The rotary EQ switch can boost signal gain from 0 dB to 27
dB. Use a small flathead screwdriver to rotate the EQ switch to one of the 8 positions.
Switch Position
Signal gain
Switch Position
Signal gain
0
0 dB
4
23 dB
1
10 dB
5
25 dB
2
16 dB
6
26 dB
3
19 dB
7
27 dB
The following table provides general guidelines for cable length, gauge (AWG),
and timing information:
Length
Gauge (AWG)
Timing
115 feet (35 meters)
24
4K x 2K
148 feet (45 meters)
24
1080p / 60 Hz
180 feet (55 meters)
24
720p / 60 Hz
Since each situation is unique, different lengths and gauges may produce different
timings.
Using Commands
In addition to adjusting the EQ setting using the rotary switch, the
command can also
be used. The command set also provides control of additional features. See
for information on each command.
Adjusting the Video Signal
Use a small flathead
screwdriver to adjust
the EQ switch
