page | 36
Commands
DISCOVERY SERVICES
Discovery (#GET_ / #SET_)
GET the current status of the discovery service
Syntax
#GET_DISCOVERY
Example Feedback
DISCOVERY 1
SET: Enable/Disable the discovery service
Syntax
#SET_DISCOVERY
Parameters
#SET_DISCOVERY PARAM1
PARAM1 - 0 ~ 1
0 - DISABLED
1 - ENABLED*
Example
#SET_DISCOVERY 0; #SET_DISCOVERY 1
Example Feedback
DISCOVERY 0
DISCOVERY 1
HELP
Prints all available TCP/UDP commands to the screen .
Syntax
#HELP PARAM1
Parameters
PRINTS THE DESCRIPTION AND SYNTAX OF THE COMMAND
PARAM1 - ANY TCP/UDP COMMAND (NO '#')
Example
#HELP SET_IP_MODE
Example Feedback
SET THE IP MODE TO DHCP, STATIC, OR AUTO IP
#SET_IP_MODE PARAM1
PARAM1 = 0 - 2 (0 = STATIC; 1 = DHCP; 2 = AUTO IP)
INPUT STATUS
Active Signal (#GETS_)
GET active signal status of one or all inputs
Syntax
#GETS_INPUT_SIGNAL
Parameters
#GETS_INPUT_SIGNAL PARAM1
PARAM1 = 0 ~ 2
0 - ALL INPUTS
1 - HDMI INPUT 1
2 - HDMI INPUT 2
Example
#GETS_INPUT_SIGNAL 0
;
#GETS_INPUT_SIGNAL 1
RESPONSE = N, Y
N = NO CLOCK SIGNAL PRESENTS AT HDMI INPUT PORT
Y = VALID CLOCK SIGNAL DETECTED AT HDMI INPUT PORT
Color Depth (#GETS_)
GET color depth of HDMI input
Syntax
#GETS_INPUT_COLOR_D
Parameters
#GETS_INPUT_COLOR_D
Example
#GETS_INPUT_COLOR_D
RESPONSE = XX
XX - COLOR DEPTH EXPRESSED IN BITS
Example Feedback
INPUT_COLOR_D 08
Содержание GTB-UHD600-18S-RT
Страница 1: ...GTB UHD600 18S RT GTB UHD600 28S RT User Manual 18S RT 28S RT...
Страница 55: ...Commands...
