Gefen GEF-UHD-89-HBT2 Скачать руководство пользователя страница 113

Страница: 113 / 232

page | 101

asic Oper

ation

asic Oper

ation

Changing Input and Output Names

By default, the names of each output are Output A - Output H. The names of each input

are Input 1 - Input 8. Each of these names can be changed, as desired, to suit the type

of device that is connected to the input or output. This allows easy reference when

performing routing operations.

1. Click the

Setup

tab within the built-in web interface.

2. Click the

Names

sub-tab.

3. Click in the field of the desired output or input to be changed.

4. Once all changes have been made, click the

Save

button.

5. The new input / output name(s) will be displayed within the

Routing

tab. Note that

the new input / output name(s), to the left of each field, will not be changed.

The Web Interface

Содержание GEF-UHD-89-HBT2









































































































































































































































Результаты поиска

Содержание GEF-UHD-89-HBT2

Отзывы:

Gefen GEF-UHD-89-HBT2, Руководство пользователя, Страница: 113 / 232

Результаты поиска

Содержание GEF-UHD-89-HBT2

Отзывы: