HOW TO ADJUST THE PICTURE
5
The fi rst step in adjusting the video quality is to display text and a graphic on your moni-
tor (i.e. desktop icons). Then set your source to the resolution that you will be using most
frequently. The dip switches are used to set the focus and sharpness of the picture to the
best possible setting. Set the dip switches to the settings that are recommended for the
different lengths of CAT5 cable (see chart below). Verify that the picture quality is to your
satisfaction. If the recommended setting does not produce a great quality picture, try using
a different dip switch setting. The trim pod next to the RJ-45 connector on the Component
Extender-S allows brightness adjustments for video.
0-25 Feet
All dip switches OFF for all colors.
26-100 Feet
Set dip switch #1 ON all colors. 2,3,4 remain OFF.
101-200 Feet
Set dip switch #2 ON all colors. 1,3,4 remain OFF.
201-300 Feet
Set dip switch #3 ON all colors. 1,2,4 remain OFF.
301 Feet and Up
Set dip switch #4 ON all colors. 1,2,3 remain OFF.
NOTE: The dip switches are set to the OFF position when the switch is closest to the
number or in the down position.