Gefen TOOLBOX GTB-HD4K2K-148C-BLK, Руководство пользователя

Страница: 20 / 30

page | 10
The 4K Ultra HD 1:8 Splitter for HDMI features a switch that will switch between 2-channel
and multichannel audio output.
Using 2-Channel Audio
Use this audio mode when all displays (and/or other sink devices) support
only
2-channel
LPCM audio.
1. Disconnect the power supply from the splitter .
2. Set the EDID switch to the Int (up) position.
3. Set the Audio switch to the 2ch (up) position.
4. Reconnect the power supply to the splitter
If the Audio switch is moved from the Multi-ch position to the 2ch position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
5. The internal EDID will restrict the audio output to the following format(s), regardless of
the audio input format:
Audio Format Speaker Allocation
LPCM 2CH FL / FR
4K Ultra HD
1:8 Splitter
for HDMI
Out 1
Out 2
Out 3
Out 4
Out 5
Out 6
Out 7
Out 8
In
Power
5V DC USB
Int
Ext
EDID
Audio
FST
2ch
Multi-ch
Fast
Slow
B
asic Oper
ation
B
asic Oper
ation
Setting the Audio Channel Mode
Information
In order for the audio channel mode to be selected, the EDID switch
must be set to the Int position. If the EDID switch is set to the Ext
position, then the
Audio
switch will have no effect on the audio output
signal. See Setting the EDID Mode (page 12) for more information.
2ch position
Int
position
B
asic Oper
ation
B
asic Oper
ation