Geemarc Loop Hear LH600, Руководство пользователя

Страница: 8 / 18

7
Setting Up
Connect Amplifier to the Sound Source
Place the amplifier near the sound source and connect the audio leads
between the sound source and the amplifier. This direct connection method
with leads gives the best results.
TV Connection:
For a TV with SCART connector audio output: connect the SCART
adaptor to the TV set; connect the RCA jack on the SCART adaptor using
the RCA convertor cable; connect the 3.5mm stereo cable to the RCA
convertor cable; connect the other end of the 3.5mm stereo cable to the unit
stereo jack of LINE 1 .
For a TV with RCA connector audio output: connect the RCA convertor
cable to the TV set; connect the 3.5mm stereo cable to the RCA convertor
cable; connect the other end of the 3.5mm stereo cable to the unit stereo
jack of LINE 1 .
For a TV with 3.5mm stereo jack audio output: connect the 3.5mm stereo
cable to the TV set; connect the other end of the 3.5mm stereo cable to the
unit stereo jack of LINE1 .
If you have another audio device you wish to connect, use the stereo jack of
LINE2 . You will have to purchase the extra audio leads.
You can test the connection between Line 1 and the loop by pushing
the
LINE1 button
.
The indicator will light red to confirm. The same can
be done to test the connection between Line 2 and the loop. Simply press
the LINE2 button and the LINE 2 LED will light up red to confirm the
connection.
INSTALLATION