Geemarc combi dect 295 Скачать руководство пользователя страница 46

Страница: 46 / 77

8.2

Alarm Settings (Handset only)

You can use this phone to set an alarm clock. When an alarm is set, the

displays

on the screen. When the alarm time is reached, the

and “ALARM ON” flash on the

screen ringing with the alarm melody for a duration of 45 seconds. You can press any
key to disable the alarm. If snooze function is activated, the alarm will sound again at
the end of the snooze period of seven minutes.

NOTES:

a. Key press is still applicable if handset keypad is locked and when the alarm time

is reached.

b. The alarm volume level is the same as the settings of the handset ringer volume.

If the handset ringer is set to

OFF

, the alarm still sounds at

VOLUME 1

level.

c. During an external call or an internal call, if an alarm is set and when the alarm

time is reached, the

and “ALARM ON” will still flash. An alarm tone will be

emitted from the earpiece to notify user the alarm time is reached. Once user
press any key or press and hold

to disable the alarm, it will revert to the call

duration screen.

d. During paging or ringing, the alarm will not sound when the alarm time is reached.

However, if snooze function is enabled, the alarm will sound again at the end of
the snooze period provided that

it’s not ringing or in paging mode at the end of the

snooze period.

8.2.1

Turn on/off the Alarm

1. Press

MENU/OK

and

to select

ALARM

2. Press

and

to select

OFF

3. Press

to confirm.

NOTE:

If ON is selected, you are prompted to set the alarm time.

8.2.2

Set the Alarm Time (if the Alarm is set to be ON)

1. Follow Steps 1 to 3 in section 8.2.1.

2. Enter the alarm time.

3. Press

MENU/OK

. You will be prompt to set the snooze function.

4. Press

and

to select

OFF

5. Press

to confirm.

SET

Содержание combi dect 295














































































Результаты поиска

Содержание combi dect 295

Отзывы:

Бренды по названию

Популярные бренды

Geemarc combi dect 295, Руководство пользователя

Результаты поиска

Содержание combi dect 295

Отзывы:

Бренды по названию

Популярные бренды