Swivel Arm Hoist
GEDA STAR 200 STANDARD / GEDA STAR 250 COMFORT
10.10 Slab grab
Hook the rope hook onto the ring (1)
- During lifting, the slabs are held by the
lever (2).
While unloading, slacken the rope so that
the lever (2) can be swivelled up by min.
90°.
The slab grab can be adjusted in height
depending on the width of the slab.
To do this, remove the screws (3) (always
fasten the upper part to the lower part using
4 screws).
-
Lowest position for slab widths from 100 to
83 cm.
-
Middle position for slab widths from 112 to
95 cm.
-
Highest position for slab widths from 125 to
108 cm.
1
2
3
Fig. 23 Slab grab
Lifting capacity: 150 kg
Weight: 24 kg
(all dimensions in cm)
Assembly and Operating Manual
Page 24 of 38
BL107 GB Edition 01.2010
