GEDA MAXI 120 S Скачать руководство пользователя страница 46

Страница: 46 / 90

Assembly

GEDA

MINI 60 S / MAXI 120 S / MAXI 150 S

Assembly and Operating Manual

46 / 90

BL068 GB Edition 03/2015

Assembly

The scaffolding lift must be installed according to the assembly
and operating manual under supervision by a qualified person,
specifically appointed by the operating company!

Assembly personnel, refer to Chapter 1.7.1

5.1

Safety during assembly

•

Also observe the safety instructions in Chapter 2.

•

Before starting work at the place of utilisation, acquaint yourself with

the working environment, e.g. obstacles in the work and traffic areas
and necessary safeguarding of the construction site from public
transport.

•

Before each installation, check whether the wire rope, mains feed

line and control with cable are in a serviceable condition. Do not op-
erate the scaffolding lift if damaged! - Immediately replace damaged
parts.

•

Cordon off the danger zone of the scaffolding lift (red-white chain,

etc.) and label with a warning sign.

DANGER

Danger to life
Do not stand or work beneath the hanging load!

Never remain inside the cordoned-off area during operation.

•

Protection to prevent persons from falling must be provided at

a height of more than 2.0 m [6.5 ft]

, which must prevent persons

from falling (as necessary, install landing-level safety gates).

•

Observe the load capacity of the scaffolding lift.

•

Wear personal protective equipment (e.g. safety helmet, safety

shoes, fall protection).

Содержание MAXI 120 S



























































































Результаты поиска

Содержание MAXI 120 S

Отзывы:

Похожие инструкции для MAXI 120 S

Бренды по названию

Популярные бренды

GEDA MAXI 120 S, Сборка и руководство по эксплуатации

Результаты поиска

Содержание MAXI 120 S

Отзывы:

Похожие инструкции для MAXI 120 S

Бренды по названию

Популярные бренды