GEDA 300 Z Скачать руководство пользователя страница 61

Страница: 61 / 104

300 Z/ZP 2

Operation

BL144 GB 2019-11

4.3.5

Controls

4.3.5.1

Functional description

The

"transport platform"

operating mode (platform control) has to be

activated.
The platform operator has to activate the platform control at the key

switch on the platform control each time after entering the platform. For

confirmation, a green control light above the platform control also lights

up.

The

"Construction hoist"

operating mode (external control) is

automatically activated.
When leaving the platform, the "Construction hoist" (external control)

operating mode is activated automatically. For confirmation, a green

control light above the platform control lights up.

•

The machine is fitted with an overload detection device. If the load

capacity is exceeded, this switches off travel movement in both

directions and the red control light on the platform control

illuminates.

•

The lower safety area is specially secured.

The lifting speed of the platform is only about 12 m/min.

DOWN

travel is only possible using dead man's control.

When the platform is descending, it stops at the lower safety

area and, before starting in this area (

UP and DOWN

) a signal is

emitted for approx. 3 s.

Within this zone,

the hoist cannot be operated from the

landing level control

When using the 2.00 m base enclosure with sliding door, the lower

safety area is omitted. The platform can then be moved down to

the ground station using all controls.

•

The platform openings (barrier, door/ramp, assembly guard,

assembly plank) are electrically monitored and interrupt the safety

circuit when opened so that the platform immediately stops or does

not move off.

The access at the ground station can only be opened when the

platform is actually at the ground station.

•

The downward travel path of the platform is limited by a

DOWN

limit

switch and the upward travel path is limited by an

limit switch. If

one of these limit switches is overrun due to a fault, the

EMERGENCY LIMIT

switch interrupts the

EMERGENCY STOP

safety circuit.

Further travel from the landing level limit switch is not possible in

either direction.

•

Installation of the construction hoist includes safety devices for the

loading and unloading points (refer to the assembly manual).

Содержание 300 Z









































































































Результаты поиска

Содержание 300 Z

Отзывы:

Похожие инструкции для 300 Z

Бренды по названию

Популярные бренды

GEDA 300 Z, Руководство по эксплуатации

Результаты поиска

Содержание 300 Z

Отзывы:

Похожие инструкции для 300 Z

Бренды по названию

Популярные бренды