GEDA
®
1500 Z / ZP
Page 92 of 114
Rev.: 004
BL 076 GB
Translation of the original operating manual
2011 / 03
16
Dismantling
The same regulations and safety instructions as described for assembly
apply for dismantling.
Disassembly is generally carried out in reverse order to assembly, in
addition please note the following:
First dismantle the landing level safety equipment (fit 3-part
protection first).
Then check whether all mast connection bolts are in engaged.
The platform must be stopped in such a way that the mast joint of
the mast being removed is located over the upper edge of the
sliding carriage.
Only loosen the mast anchors if there are no longer any mast
sections above the anchor point.
Always unload the platform in the interim time (the hoist cannot be
moved if overloaded).
17
Disposal of the machine
Dismantle the equipment properly at the end of its service life and dispose
of in an environmentally friendly way according to national provisions.
It is prohibited to recycle parts from a machine that is being disposed of
and use them in other machines, or to assemble such parts into a new
machine.
