GEDA
®
1500 Z / ZP
Page 51 of 114
Rev.: 004
BL 076 GB
Translation of the original operating manual
2011 / 03
Operation is from:
the platform, as a transport platform
as a construction hoist from the ground station and landing levels.
The machine can be stopped at any desired position by releasing the
respective button. If landing-level switch bars are set, a landing-level can
be directly moved to by again pressing the landing-level stop button.
If entrance to or exit from the platform is required at a landing-level, the
platform must be stopped so that it is at the same level as the landing
level. There must be no ledge between the platform and landing level.
Securing/designate the bottom hazard area
If no enclosure is to be used,
then the hazard area around
the machine must be
designated and secured
appropriately (5). National
regulations on
securing/designating the
hazard area must be
observed.
5
