GEDA
®
1500 Z / ZP
Page 39 of 114
Rev.: 004
BL 076 GB
Translation of the original operating manual
2011 / 03
7
Obligatory safety instructions
7.1
Basic conduct while working with the machine
The machine must be in a technically fault-free condition, be used
in a hazard-conscious way and in accordance with the instructions
in this manual.
Acquaint yourself with the machine's mode of operation, the
operating controls and safety equipment.
The stipulated operating steps and their sequence must be adhered to.
These points must be clarified if there is any lack of clarity regarding
proper condition or correct operation. Operation is prohibited until
the matter is clarified.
The operator is responsible for third parties located within the
working area of the machine.
Unauthorised persons must be kept away from the machine, if
necessary set up warning notices.
All safety conditions relevant to the prospective job/activity must be
adhered to.
Responsibilities for different activities must be clearly established
and adhered to. Lack of clarity considerably compromises safety.
Safety and emergency equipment may neither be removed, altered
nor made ineffective and must be inspected at regular intervals to
ensure correct function and completeness.
Rectify any faults that occur which fall within the context of your
responsibility.
If faults occur outside of your area of responsibility, inform your
superior immediately.
In the event of wind speeds of > (72 km/h), bring the platform down
to the ground and cease operation.
Smoking, eating, drinking and naked flames are prohibited.
Wear personal protective gear.
During all types of work, and if conditions are wet, frosty and/or
dirty, keep all floors, steps, pedestals, platforms, and climbing aids
fall-proof and slip-resistant using appropriate measures
(e.g. drying, cleaning, de-icing).
Remove ice, snow or other contamination.
Do not use if there is a thunderstorm (lightning).
