GEDA 14830, Сборка и руководство по эксплуатации

Страница: 54 / 92

Rack and pinion hoist
Assembly and Operating Manual 54 / 92 BL054 GB Edition 08.2015
6.4 Securing loading and unloading points
To prevent persons falling, fall protection must be installed at all loading
and unloading points where there is a risk of falling from a height of
more than 2m.
The “
ECO
” landing-level safety
door, together with the loading ramp
on the load platform, provides safe
transfer to the building or scaffold.
Item No. 39700

Assembly is described in the assembly manual for the landing-
level safety door.
6.4.1 Electric module for the landing-level safety door
The landing-level safety door can be electrically monitored with the
electric module and the load platform can be controlled “ UP ” and
“
DOWN
” from the landing level
Instead of the dummy plug, the supply line for the electric module is
inserted into the red, 7-pole socket (1) at the ground-station switch box.
• If there are multiple landing-level safety
doors, the dummy plug (2) is always
plugged in at the top electric module.

The load platform can only be run down by
the electric module to approx. 2.0 m above
the ground. The remaining 2.0 m to the
ground can only be traversed using the
manual control (ground control) in dead
man's mode!

Assembly and operation of the electric module is described in the
assembly instructions for the landing-level safety door.
2