Quick Reference Card
DYNAMIC JET SEQUENCER
Your Dynamic Jet Sequencer controls 4 jet sets in your spa's "hot seat".
This
Quick Reference Card
provides a quick overview of your jet
sequencer's main functions and the operations accessible with your
DJS-1 keypad.
DJS-1
To start your sequencer:
Press
on/off
key to turn sequencer on. The system
will then perform an indicator light test and open all
valves. Pressing a second time will turn sequencer off.
A built-in timer automatically turns sequencer off after
2 hours, unless manually deactivated first.
Note:
If the DJS-1 is installed in a spa using a Gecko
Electronics' spa pack or is equipped with an optional
pressure switch, the DJS-1 will go on by itself whenever
the pump is turned on.
To select and preview a sequence:
Press
sequences
key to select one of the 7 prepro-
grammed massage sequences. Note that only the
first 6 sequences have corresponding indicator lights.
The 7th sequence, where all valves are opened at
the same time, does not have an indicator light. A
preview of the massage is displayed for 5 seconds
after selecting a sequence.
To change sequence speed:
Press
speed
key to change the time interval
between each step of the selected massage
sequence:
Speed 1: 15 seconds between each step.
Speed 2: 10 seconds between each step.
Speed 3: 5 seconds between each step.
The corresponding indicator light flashes to reflect
the selected speed.
To pause a massage sequence:
Press
pause
key to interrupt a massage sequence
and prolong the action of a jet set (or a combination
of sets). Pressing a second time will resume the
massage sequence. The "Pause" indicator light will
be on in Pause mode.
