GeBe GPT-4673, Руководство по эксплуатации

Страница: 8 / 34

GeBE-TESTBENCH Linerless GPT-4673
FEED BUTTON
The FEED button (5/figure 1) serves to feed the paper
forwards. When pressing the FEED button, the paper feeds
first only one line of the set font. When holding the FEED
button down for more than two seconds, the paper feeds
continuously.
SELF TEST (programable)
By starting a self test printout, the printer functions can be
tested. For this purpose, the FEED button (5/figure 1) has
to be pressed down when switching on the printer. The
interfaces are not tested. Software version and character
set are printed out. For OEM, special printouts can be
activated during the self test.
TEST BUTTON (programable)
By default, the TEST button (3/figure 1) is not
programmed. If required, 3 different functions can be
programmed for this key (macro batch file):
→ batch file):
Time Description
T1 briefly pressed programable:
execution of a macro batch
file T15
T15 kept pressed
for minimum
2 seconds factory set to print the
character set and software
version
RESET kept pressed
for minimum
12 seconds
execution of a RESET
3.2 CONNECTIONS
Figure 2: Connections – right side
Figure 3: Connections – left side
Overview connections
No. Designation GCT-4663-50
1 Power supply horizontal J1
2 USB horizontal J2
3 USB vertical J212
4 Power supply vertical J211
5 Connection NPE-Sensor J40
IMPORTANT:
For the power supply only J1 or J211 may be used.
For USB connection only J2 or J212 may be used.
GeBE Elektronik und phone +49.89.894141-0 GeBE-document-no. GPT-4673-LL-Testbench-C32-E-SMAN-V1.0-0973
Feinwerktechnik GmbH fax +49.89.894141-33 date September 4, 2019
Beethovenstraße 15 page 8 | 34
82110 Germering email info@gebe.net Our general terms of business are to be applied.
Germany Internet www.gebe.net Errors and changes reserved.
2 3
5
1
NPE-
Sensor
4