background image

SAFETY

4

Safety of  the operator and bystanders is one of  the main concerns in designing and developing a

tiller. However, every year accidents occur which could have been avoided by a few seconds of

thought and a more careful approach to handling equipment. You, the operator, can avoid many

accidents by observing the following precautions and insist those working with you, or for you,

follow them.

In order to provide a better view, certain photographs or illustrations in this manual may show an

assembly with a safety shield removed. However, equipment should never by operated in this con-

dition. Keep all shields in place. If  shield removal becomes necessary for repairs, replace the shield

prior to use.

Replace any safety sign that is not readable or missing. Location of  such safety signs are indicated in

this manual.

Never use alcoholic beverages or drugs that can hinder alertness or coordination while operating

this equipment. Consult your doctor about operating this machine while taking prescription medi-

cations.

Under no circumstances should children under the age of  18 be allowed to work with this equip-

ment. Do not allow persons to operate or assemble this unit until they have read this manual and

have developed a thorough understanding of  the safety precautions and how it works. Review the

safety instructions with all users annually.

This equipment is dangerous to children and persons unfamiliar with its operation. The operator

should be a responsible, properly trained and physically able person familiar with farm machinery

and trained in this equipment's operations. If  the elderly are assisting with farm work, their physical

limitations need to be recognized and accommodated.

Use a tractor equipped with a Roll Over Protective System and seat belts. (ROPS)

Never exceed the limits of  a piece of  machinery. If  its ability to do a job, or to do so safely, is in

question - 

DON'T TRY IT.

Do not modify the equipment in any way. Unauthorized modification could result in serious injury

or death and may impair the function and life of  the equipment.

In addition to the design and the confirmation of  this implement, including safety signs and safety

equipment, hazard control and accident prevention are dependent upon the awareness, concern,

prudence, and proper training of  personnel involved in the operation, transport, maintenance, and

storage of  the machine. Refer also to safety messages and operation instruction in each of  the

appropriate sections of  the tractor and tiller manuals. Pay close attention to the safety signs affixed

to the tractor and the tiller.

EQUIPMENT SAFETY GUIDELINES

Содержание XB48

































Отзывы: