Gearmore T1618, Руководство по сборке и эксплуатации

Страница: 11 / 22

2.9 HYDRAULIC SAFETY
9
2.10 STORAGE SAFETY
 Make sure that all the components in the
hydraulic system are kept in good condition
and are clean.
 Replace any worn, cut, abraded, fl attened or
crimped hoses and metal lines.

Relieve pressure before working on
hydraulic system.
 Do not attempt any makeshift repairs to the
hydraulic lines, fi ttings or hoses by using
tapes, clamps or cements. The hydraulic
system operates under extremely high
pressure. Such repairs will fail suddenly
and create a hazardous and unsafe
condition.

Wear proper hand and
eye protection when
searching for a high
pressure hydraulic
leak. Use a piece of wood
or cardboard as a
backstop instead of hands
to isolate and identify
a leak.
 If injured by a concentrated high pressure
stream of hydraulic fl uid, seek medical
attention immediately. Serious infection or
toxic reaction can develop from hydraulic
fl uid piercing the skin surface.
 Before applying pressure to the system,
make sure all components are tight and
that lines, hoses and couplings are not
damaged.

When disconnecting hydraulic lines, shut off
hydraulic supply and relieve hydraulic
pressure.
1. Store the unit in an area away from human
activity
2. Do not permit children to play on or around
the stored machine.
3. Store the unit in a dry, level area. Support
the frame with planks or blocks if required.
SAFETY RECAP
The manufacturer follows the general Safety Stand-
ards speci fi ed by the American Society of Agricul-
tural Engineers (ASAE) and the Occupational Safety
and Health Administration (OSHA). Anyone who
will be operating and/or maintaining the Tandem
Disc must read and clearly understand ALL Safety,
Operating and Maintenance information presented
in this manual.
Do not operate or allow anyone else to operate this
equipment until such information has been reviewed.
Annually review this information before the season
start-up.
Make these periodic reviews of SAFETY and OPERA-
TION a standard practice for all of your equipment.
We feel that an untrained operator is unquali fi ed to
operate this machine.
Think SAFETY! Work SAFELY!