background image

2

2     SAFETY

SAFETY ALERT SYMBOL

Why is SAFETY important to you?

The Safety Alert symbol identi

fi

 es 

important safety messages on the 
Twinstar Basket Rake and in the 
manual.  When you see this symbol, 
be alert to the possibility of personal 
injury or death.  Follow the instruc-
tions in the safety message.

This Safety Alert symbol means

 

ATTENTION!  BECOME 

 

ALERT!  YOUR SAFETY IS
 INVOLVED!

 

Accidents Disable and Kill

 Accidents 

Cost

 

Accidents Can Be Avoided

3 Big Reasons

 

WARNING - 

  Indicates a potentially hazardous 

     

 DANGER 

 Indicates an imminently hazardous 

 

CAUTION - 

 

 Indicates a potentially hazardous 

situation that, if not avoided, may 
result in minor or moderate injury.  
It may also be used to alert against 
unsafe practices.

situation that, if not avoided, could 
result in death or serious injury, and 
includes hazards that are exposed 
when guards are removed.  It may 
also be used to alert against unsafe 
practices.

situation that, if not avoided, will re-
sult in death or serious injury.  This 
signal word is to be limited to the 
most extreme situations typically 
for machine components which, 
for functional purposes, cannot be 
guarded.

SIGNAL WORDS:

Note the use of the signal words 

DANGER,

 

WARNING 

and 

CAUTION

 with the safety 

messages. The appropriate signal word for 
each message has been selected using the
following guide-lines:

If you have any questions not answered in this manual or require additional copies or the manual is dam-
aged, please contact your dealer or GEARMORE INC., 13477 Benson Avenue, Chino, CA 91710
Phone: 909.548.4848 - Fax: 909.548.4747 [email protected]

SI NO LEE INGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA PARA
QUE LE TRADUZCA LAS
MIDIDAS DE SEGURIDAD.

Содержание ARENA-VATOR II






























Отзывы: