GEAppliances JHP69GN, Инструкция по использованию и уходу

Страница: 12 / 52

FEATURES YOUR
OVEN CONTROL PANEL
ENTER COOK DEF TIMER ROAST
TEMP COOK
13 DOOR
STOP T
I
M
E
WEIGHT LBS LATCHEO
r,
.——.—.
CONVENTIONAL BAKE
STOP
OVEN TIMER TIME TIME
The clock conventional oven
operate.
1. time of’ day.
Oven: Displays or
being
Auto
cook
i
Conventional Oven: Displays Time B&e Start and
Stop times, self-clean oven Clean Time,
door
and instructions.
E COOK. Microwave a preset amount of
using power level (or the
power cooking time).
Gentle thawing automatic
level (or the power after entering the
defrosting time).
4. AUTO COOK. The oven automatically microwaves
at power levels and determines the
proper amount of cooking times until the food is
done and the oven shuts off.
5. AUTO Press this pad, then the code number
and the food weight. The oven automatically sets the
power levels and the defrosting time.
6. AUTO ROAST. Insert the probe, press this pad,
and the desired number pad for code to slow cook
or temperature cook the meat with the automatic
preset
7. TEMP Use the temperature probe
to cook by using preset temperature. Once the oven
reaches the preset temperature, it switches to the
Hold setting and maintains that temperature until you
either open the door or press the CLEAR/OFF pad.
8. POWER LEVEL. Press this pad before entering
another power level number if you to change
from the automatic power level 10 (High) for
cooking or power level 3 (Low) for defrosting.
12
pressed.
m
of do)).
10. START. made,
pad to
and
timer
11. CLEAR. this pad to stop
oven timer
and
self-cleaning or
a Time.
12. TIMER. This feature uses no
energy. as a kitchen timer,
a hold mer defrost or delay timer before
microwave time or temperature cooking.
STOP TIME. Press this pad and then the
pads enter the time you want the oven to finish
baking or cleaning. The oven will automatically
calculate the correct Start Time for you.
14. CLOCK. Press this pad to enter the time of day
or check time of day while cooking.
set the first press the CLOCK pad and
then enter the time of day. For example, if the time
is 1
press the number pads and (). “Star”t”
will flash on the display, directing to press the
START pad, thus setting the clock.
To reset or change the time, simply repeat the
above process.
15. BAKE TIME. Press this pad and then the number
pads to enter the baking or roasting time. The oven
turns off automatically at the end of that time if the
OVEN SET knob is on TIME BAKE.
16. NUMBER PADS. Press these pads to enter
cooking, defrosting time, time of day, temperature,
—
power level, Auto Roast Codes, conventional oven
bake Start and Stop Times and to change the
Cleaning Time on the self-cleaning oven.