Problem
Possible Causes
What To Do
Heater does not start
The heater is unplugged.
•
Make sure the heater plug is pushed completely
into the outlet.
The fuse is blown/circuit
•
Check the house fuse/circuit breaker box and replace
breaker is tripped.
the fuse or reset the breaker.
Power failure.
•
If a power failure occurs, turn the heater off.
When power is restored, restart the heater.
Heater stopped running
Power interruption or
•
When the power is restored, restart the heater.
power failure occurred.
Heater knocked or tipped over.
•
See the
Tip-Over Switch
section.
Heater does not heat
Airflow is restricted.
•
Make sure there are no curtains, blinds or furniture
as it should
blocking the inlet or outlet of the heater. Make sure
there is at least 3 feet (0.9 m) of space on all sides of
the unit.
The temp control may not
•
In
LO heat
or
HI heat
mode, press the
Increase
pad.
be set correctly.
The room may have been cold.
•
When the heater is first turned on, you need to allow
time for the room to warm up.
The remote control is
The batteries are inserted
•
Check the position of the batteries. They should be
not working
incorrectly.
inserted in the opposite (+) and (–) direction.
The batteries may be dead.
•
Replace the batteries.
Heater is turned off,
This is normal. After turning
•
Wait—when internal parts are cool, the fan will
but unit still runs
the heater off, the fan will
automatically turn off.
continue to run for up to one
minute to cool internal parts.
Troubleshooting tips.
Save time and money!
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Care and Cleaning
6