GeaCom Phrazer Kitsune, Руководство пользователя

Страница: 13 / 69

G E T T I N G S T A R T E D W I T H P H R A Z E R / K I T S U N E
2.3 Phrazer Back View
LEDs - On the top of Phrazer’s case are two bright Light Emitting Diodes (LEDs) that turn on if
triggered during Phrazer operation. These lights can emit green, red, blue and white light. The lights
are visible to the patient as well as any one who can see the back of Phrazer. The lights are primarily
used to indicate patient status in CITE Engagements to staff.
Charger Port - On the back side of Phrazer, located at the bottom, is an opening for the charge cord.
This opening is protected by a cover that can be pulled back to expose the slot for inserting the
charger.
Serial Number - Just above the charger port is a serial number. There is a unique number assigned to
each device. This number is used for Customer Support, device management and other manufacturing
processes.
On and Off Switch - This electronic switch, exclusively activated by the Crypto Key, is the only way
to power Phrazer on and one way to power Phrazer off. The switch is located inside the case and
cannot be directly accessed for security purposes.
! 8