GEA VARIVENT 24/7 PMO, Оригинальная инструкция по эксплуатации

Страница: 17 / 93

17
Safety
Instructions for the Safe Operation
Disassembly
For disassembly, the following principles apply:
• Only allow qualified staff to disassemble the valve.
• Before starting disassembly, the valve must be switched off and secured against
being switched back on. Work may only be started once any residual energy has
been discharged.
• Disconnect all power and utility lines.
• Markings, e.g. on lines, must not be removed.
• Do not climb on the valve. Use suitable access aids and working platforms.
• Mark the lines (if unmarked) prior to disassembly to ensure they are not confused
when re-assembling.
• Protect open line ends with blind plugs against ingress of dirt.
• Pack sensitive parts separately.
• For longer periods of standstill, observe the storage conditions, see “Storage“
(Page 24).
Environmental Protection
Harm to the environment can be avoided by safety-conscious and proactive behaviour
of the staff.
For environmental protection the following principles apply:
• Substances harmful to the environment must not be discharged into the ground or
the sewage system.
• Always observe the pertinent regulations relating to waste avoidance, disposal and
utilization.
• Substances harmful to the environment must be collected and stored in suitable
containers. Clearly mark the containers.
• Dispose of lubricants as hazardous waste.
Electrical Equipment
For all work on electrical equipment, the following principles apply:
• Access to electrical equipment should only be allowed to qualified electricians.
Always keep unattended switch cabinets locked.
• Modifications of the control system can affect the safe and reliable operation. Modifi-
cations are only permitted with the express permission of the manufacturer.
• After completion of all work, check that the protective devices are fully functional.