GEA T.VIS P-15, Инструкция по эксплуатации

Страница: 7 / 66

2 Safety
2.1 Intended use
The programmable positioner T.VIS P-15 (Tuchenhagen Valve Informations
System) kallows GEA Tuchenhagen and ASEPTOMAG single-seat valves to be
set to any position within the given stroke (5-70 mm), provided the pneumatic and
electrical connections are established correctly.
The positioner T.VIS P-15 consists of a base and a hood. It is completely
mounted on the actuator/adapter of the process valve provided for this purpose
using two clamps. The internal hose system directly connects the control air to
the process valve. For process valves which do not allow the air to be guided
internally, the control top has a connection option for supplying the air externally
via a hose.
The control top T.VIS P-15 may not be used in areas where ATEX approval is
required.
Hint!
The manufacturer will not accept any liability for damage resulting
from any use of the valve which is not in accordance with the
designated use of the valve. The risk is borne solely by the operating
company.
2.1.1 Requirements for operation
The prerequisite for reliable and safe operation of the component is proper
transportation and storage as well as professional installation and assembly.
Operating the unit within the limits of its designated use also involves adhering to
the operating, inspection and maintenance instructions.
2.1.2 Improper operating conditions
The operational safety of the component can not be guaranteed under improper
operating conditions. Therefore avoid improper operating conditions.
The operation of the component is not permitted if:
• Persons or objects are in the danger zone.
• Safety devices are not working or were removed.
• Malfunctions have been detected on the component.
• Damage to the component has been detected.
•
Maintenance intervals have been exceeded.
2.2 Operator’s Duty of Care
The operating company of the component has a special responsibility for the
proper and safe handling of the component within their company. Only use the
component when it is in perfect operating condition in order to prevent danger to
persons and property.
Safety
Intended use
430BAL010747EN_3
24.07.2020 7