GEA T.VIS E-20, Инструкция по эксплуатации

Страница: 4 / 112

Sensor module data 42
5.2.5 General Technical Data 43
5.3 Accessories 44
5.4 Tool 45
5.5 Lubricants 45
5.6 Equipment 46
6 Assembly and installation 47
6.1 Safety precautions 47
6.2 Establishing hose connections 47
6.3 Pneumatic connections 47
6.3.1 Control Top with 1 Solenoid Valve or Without Solenoid Valve 48
6.3.2 Control top with 2 solenoid valves 49
6.3.3 Control top with 3 solenoid valves 50
6.4 Electrical connections 51
6.4.1 Overview 52
6.4.2 Specification for electrical wiring 52
6.4.3 Electrical wiring 53
Terminal strip assignment in relation to the order code 53
Terminal strip designation and separate intrinsically safe circuits 53
Wiring diagram T.VIS E-20 56
Execution and verification of the connection of internal and external circuits 57
6.5 Visual Display 57
6.5.1 Illuminated dome 58
6.6 Mounting the control top to different valves 58
6.6.1 Mounting VARIVENT Valve or STERICOM Valve Types N_A/D, R 60
6.6.2 Mounting to a Butterfly Valve T-smart 8000 62
6.6.3 Mounting to a Butterfly Valve T-smart 7 and a Mixproof Butterfly Valve T-smart 9 64
6.6.4 Mounting to ECOVENT Valves N_ECO and W_ECO 66
6.6.5 Mounting to VESTA Valve H_A/M 68
6.6.6 Mounting to Valve N_/E or W_/E or STERICOM Valve 70
6.6.7 Fitting to an ASEPTOMAG Valve 72
6.6.8 Replacing Control Tops 73
7 Start-up 74
7.1 Safety precautions 74
7.2 Switching On Control Air and Operating Voltage 74
7.3 Checking Valve Actuation 74
7.4 Service Function 75
7.5 Adjusting sensors on the control top 76
7.5.1 Spring-closing valves 77
7.5.2 Spring-opening valves 79
8 Operation and control 85
8.1 Safety precautions 85
9 Cleaning 86
9.1 Cleaning 86
10 Servicing 87
10.1 Safety instructions 87
10.2 Inspections 89
10.3 Disassembly 90
10.3.1 Removing the Control Top from the Valve 90
10.3.2 Dismantling the Control Top into its Components 90
Variants of the Control Top 90
Removing the Cap 91
Removing the Solenoid Valves and the Valve Plate 92
Removing the sensor module 93
Removing the pneumatic block 93
10.4 Installation 94
10.4.1 Install pneumatic and external connections 95
10.4.2 Fitting the Pneumatic Block 95
10.4.3 Mounting the sensor module 97
10.4.4 Mount solenoid valves and valve plates 97
10.4.5 Connect internal wiring 98
10.5 Maintenance 100
430BAL013985EN_6
4 25.04.2023