GEA T.VIS E-20, Инструкция по эксплуатации

Страница: 20 / 112

•
The signs on the component must always be complete and easy to read.
Check, clean and replace the signs as necessary at regular intervals.
•
Observe the Technical Data specified and the limits of use!
Hint!
Carry out regular checks. This way you can ensure that these
measures are actually observed.
2.3 Special terms of use
Special terms of use and technical data must be observed.
Failure to observe the conditions terms of use may result in severe
explosions.
► Special conditions of use marked with the following triangle exclamation
mark must be observed.
► Additional technical data and special conditions as described in chapter 5
must be observed.
Special precautions are required to reduce the risk from electrostatic discharge. See installation/
operating instructions:
When used for a Group III (dust) application, the surface of the housing may be affected by
electrostatic charge and become a source of ignition in low relative humidity applications <~30%,
humidity if the surface is relatively free of surface contaminants, such as dirt, dust or oil.
Information on protection against ignition hazards due to electrostatic discharge can be found in
IEC EN TR50404 and IEC TS 60079-32-1. The surface should only be cleaned with a damp
cloth.
The applicable ambient temperature must be maintained by reading and understanding the user
manual, taking into account the temperature of the process medium.
The unit is designed and certified for simultaneous actuation of a maximum of two solenoid
valves. The simultaneous operation of more than two solenoid valves will increase the
temperature to a critical and non-certified level.
Cable glands are certified and specified in the test reports and must be used as intended.
The cable glands must be certified at least according to ATEX/UKEX and IECEx IP65.
Special precautions are required to reduce the risk from electrostatic discharge. See installation/
operating instructions.
Safety
Special terms of use
430BAL013985EN_6
20 25.04.2023