GEA T.VIS E-20, Инструкция по эксплуатации

Страница: 19 / 112

The prerequisite for reliable and safe operation of the component is proper
transportation and storage as well as professional installation and assembly.
Operating the unit within the limits of its designated use also involves adhering to
the operating, inspection and maintenance instructions.
2.1.2 Improper operating conditions
The operational safety of the component can not be guaranteed under improper
operating conditions. Therefore avoid improper operating conditions.
The operation of the component is not permitted if:
•
Persons or objects are in the danger zone.
•
Safety devices are not working or were removed.
•
Malfunctions have been detected on the component.
•
Damage to the component has been detected.
•
Maintenance intervals have been exceeded.
2.2 Operator’s Duty of Care
The operating company of the component has a special responsibility for the
proper and safe handling of the component within their company. Only use the
component when it is in perfect operating condition in order to prevent danger to
persons and property.
This operating manual contains information that you and your employees need
for safe operation over the life of the component. Be sure to read these Operating
Instructions carefully and ensure that the measures described here are observed.
The operator's duty of care includes planning the necessary safety measures and
monitoring that these measures are observed. The following principles apply:
•
Only qualified personnel may work on the component.
•
The operating company must authorize personnel to carry out the relevant
tasks.
•
Order and cleanliness must be maintained at the work stations and in the
entire area surrounding the component.
•
Personnel must wear suitable work clothing and personal protective
equipment. As the operating company must ensure that work clothing and
personal protective equipment are used.
•
Inform personnel regarding any properties of the product which might pose a
health risk and the preventative measures to be taken.
•
Have a qualified first-aid representative on call during the operation. This
person must be able to initiate any necessary first-aid measures in case of an
emergency.
•
Clearly define procedures, competences and responsibilities for those
working in the area of the component. Everybody must know what to do in
case of an emergency. Instruct the staff in this respect at regular intervals.
Safety
Operator’s Duty of Care
430BAL013985EN_6
25.04.2023 19