GEA Niro Soavi One7TS, Инструкция по эксплуатации

Страница: 62 / 294

Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
03C100-4C0
GEA Niro Soavi 60
3.5.4 Housing
The machine is equipped with a housing (1) in stainless steel sheeting which:
- protects internal parts from dirt, water and soiling by the product;
- allows for external cleaning;
- protects the operators from moving parts, live parts and hot parts which may be hazardous to
staff as required by established EC standards and local safety legislation.
CAUTION:
The machine must ONLY operate with its housing or guards completely closed in order to
avoid the hazard of operator accidents. Therefore, these guards must never be opened while
the machine is running.
The panels can be removed for maintenance and installations.
The side panels are fitted with handles (2) and screws for access to the machine's interior for
maintenance.
CAUTION:
Make sure that ALL locks are shut before starting the machine to guard against accidents;
use only the provided handles when moving the panels. Depending on the size of the panels,
two persons may be required to remove or fit them.
CAUTION:
Before removing the protective panels the personnel in charge of installation and maintenance
must cut off the machine's power line with the disconnecting device, locking it with a padlock.
HOUSING
FIG. 3.12