GEA Niro Soavi One7TS, Инструкция по эксплуатации

Страница: 44 / 294

Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
02C100-7C0
GEA Niro Soavi 42
2.4 Ambient operating conditions
The machine does not require special ambient conditions.
It must be installed inside a suitably large industrial building which is lit, ventilated and equipped with
a level, solid floor rated to bear the concentrated weight of the machine.
Temperatures: + 5° to + 40°C.
Relative humidity: 30% - max. 90% non-condensing
Max altitude 1000 m asl
NOTE: Unless otherwise indicated in the technical data sheet.
2.5 Atmospheres with risk of explosion/fire
CAUTION:
The machine is not designed to operate in a potentially explosive atmosphere. Do not operate
the machine in a fully or partially potentially explosive atmosphere.
2.6 Illumination
The worksite must be adequately lit with natural light and equipped with sufficient artificial lighting to
guarantee the health and safety of the workers.
The lighting must comply with local legislation and must be even and provide good visibility of all
parts of the machine without hazardous reflections, and enable clear legibility of the control panel
and view of the emergency stop button.
2.7 Vibration
In proper use, as explained in this manual, any vibrations are non-hazardous.
However, the operator must stop the machine immediately in case of hazardous vibration and notify
GEA Niro Soavi accordingly.
2.8 Noise
The equivalent continuous A-weighted sound pressure level at the position occupied by the operator
(at a distance of 1 m and a height of 1.69 m) is greater than 70db , measured while testing the
machine.