2.6
Staff qualifications and training
The staff for working on and with the pump must have the appropriate
qualifications. Responsibilities, competencies and supervision of staff must be
clearly defined by the operating company. If personnel do not have the necessary
knowledge, they are to be trained and instructed. If necessary, this can be done
by the product manufacturer/vendor on behalf of the operating company. The
operating company must also ensure that the contents of the operating
instructions are fully understood by the staff.
2.7
Safety equipment
Do not remove instructions from the pump.
Signs attached directly on the machine, such as an arrow to indicate the direction
of rotation, must absolutely be observed and kept in fully legible condition.
Damaged or illegible signs must be replaced.
2.8
Possible residual hazards
Hint!
Despite careful design of the machine and the implementation of all
safety-relevant regulations, further risks for persons and machine
during all life phases of the pump cannot be fully ruled out. The
additional safety instructions in the individual chapters of this manual
must therefore be carefully observed!
The residual risks that were ascertained during the risk assessment carried out
for the product according to safety standard EN ISO 14121 - Safety of Machines -
are:
–
mechanical hazards due to sharp sheet metal edges and projecting parts
–
electrical hazards as a result of inadvertently coming in contact with terminals
and cables
–
thermal hazards as a result of inadvertently coming in contact with pump
housings and pipes
–
exposure to noise
–
hazards caused by vibration due to improper installation
–
hazards due to working materials and other materials in case of allergies or
the like.
–
neglect of ergonomic principles
–
combinations of various hazards
–
unexpected starting, unexpected rotation in case of wrong electrical
connections or defects
–
shut down, emergency stop when defects are detected
–
changes to the rotational speed
–
power failure
–
Hazard from insufficient / incorrect cleaning - Product contamination,
Safety
Staff qualifications and training
BA.H2A.KYY.001.GB_2
27.02.2018
13
