GEA EL48 Скачать руководство пользователя страница 135

Страница: 135 / 192

Maintenance

Change air brake parts

2018-9015-001
09-2016

135 / 192

9.27

Change air brake parts

If necessary

Note!

Connect the emergency line (red hose).

Remove the wheel

Attention!

Make sure the spreader is empty.

● Do not apply air pressure in the

emergency line (red hose);

● Using a jack with a minimum lifting

capacity of 4000 lbs (2000 kg), lift
the spreader wheel;

● Remove the wheel nuts with an air

impact gun;

● Remove the wheel and store it in a

safe area using a forklift truck;

● Do not lower the spreader to avoid

damaging the brake boosters.

Refer to section Handling and assembly - Wheel assembly.

Remove dust shields

● Unscrew nuts and locknuts from the

upper (1) and lower (2) dust shields;

● Remove flat washers and lock

washers from the upper (1) and
lower (2) dust shields.

Содержание EL48

































































































































































































Результаты поиска

Содержание EL48

Отзывы:

GEA EL48, Руководство по эксплуатации, Страница: 135 / 192

Результаты поиска

Содержание EL48

Отзывы: