manualshive.com logo in svg

GEA EL44, Инструкция по эксплуатации и руководство по установке

Поделиться
Скачать
GEA EL44 Скачать руководство пользователя страница 76

Operating

Loading the spreader

2018-9015-003
03-2015

76 / 148

8.7

Loading the spreader

Attention!

Make sure all drains and cleaning openings are closed before loading.

Attention!

Always keep this product on a flat and level surface.

Attention!

Do not use the jack when the spreader tank contains liquid.

Note!

Park the spreader on a level and firm surface.

Note!

Before loading the spreader, make sure that manure is homogenized
and that the consistency matches the tool bar capacity. Refer to
section Appendix - Consistency test.

To load the spreader with the self-loading option, refer to section
Operating - Operating spreader options - Self-loading.

● Position the spreader to center the

loading pipe (1) in the fill opening (2).

● Open the hydraulic sliding door, if

applicable.

● Start filling the spreader with liquid

manure.

2

1

Содержание EL44





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды