Mounting, installation and connection
28
BA.10A.CNY.001.01.10.GB
4.6.3 Double mechanical seal - tandem
arrangement
Flushing liquid
In order to continue functioning, the mechanical seals require
a flushing liquid, some of its purposes being:
•
Preventing leaks
•
Dry-run protection
•
Lubrication and cooling of the mechanical seals
•
cutting off the air from substances which react unfavoura-
bly with oxygen.
A pure liquid, compatible with the pumped liquid, serves as a
flushing liquid.
Ensure the functioning in this way:
1. Open feed line for flushing liquid
2. Bleed seal cartridge
3. Ensure unpressurized circulation.
A pure liquid, compatible with the pumped liquid, serves as a
flushing liquid.
In case of abrasive media provide a „lost“ flushing, i.e. where
the flushing liquid is discharged directly.
4.7 Electrical connections
W A R N I N G
!
Danger of electric shock!
Electric shock can cause death or bodily harm.
•
The electrical connections must be made by a qualified
electrician.
•
VDE specifications and any local regulations must be fol-
lowed, especially those pertaining to safety measures!
W A R N I N G
!
Danger of capacity overload!
Electrical overloading can cause death, bodily harm or dam-
age to plant or motor.
•
Check the voltage stated on the rating plate of the motor
against the operating voltage!
•
Install an electrical circuit breaker!
