Mounting
Safety Instructions
7159-9001-108
01. February 2020
5
Mounting
If necessary, please contact your nearest dealer.
5.1
Special Personnel Qualifications
Installation may only be carried out by specially qualified personnel in accordance
with the safety instructions.
See also the section on ”Personnel qualification”.
5.2
Safety Instructions
To prevent damage to property and/or life-threatening injury to people during
installation, the following points must always be observed:
● Assembly must be carried out in accordance with national standards and
regulations.
Example:
Carry out electrical installation work in accordance with the following standards
and requirements:
- EN 60204, Point 14 (Electrical equipment of machines).
- VDE 0100 (Regulations on the erection of heavy current installations)
● Before installation, look for any damage caused during transport. Do not use
damaged components!
● Use only the special tool indicated for assembly.
● All electrically conductive parts with which animals might come into contact must
be connected to each other and to the system's protective earth conductor by
additional equipotential bonding.
● In the cases of devices with 24 V direct voltage, the power supplies stipulated
by the manufacturer and approved for the devices must be used, because the
safety of personnel and of the building cannot be ensured otherwise.
● Read the ”Safety” section as well.
