GE XDP-H2, Руководство пользователя

Страница: 33 / 96

January 2008
4-4 Setup and Calibration
Adjusting the Display
Contrast
After entering the User Program , as described on page 3-4, the main
menu appears. To adjust the contrast of the LCD display, proceed as
follows:
Note:
“Lock All” and “Versions” menu options also appear on the
above list.
Note:
The “Fault Alarm” and “Comm” options are also available in
the above list box.
Press
[ESC]
as many times as necessary to return to normal
RUN
mode,
or proceed to the appropriate section of this chapter to continue
programming the XDP.
Cal
Opt
Disp Use the [
W
] and [
X
] keys to
select
[Opt]
and press
[ENTER]
.
Cal Opt Disp Use the [
S
] and [
T
] keys to
select
[User]
and press
[ENTER]
.
User
Lock Menus
User Use the [
S
] and [
T
] keys to
select
[Contrast]
and press
[ENTER]
.
Analog Output
Contrast
Backlight
User.Adjust-Contrast Use the [
S
] and [
T
] keys to
increment the value to a num-
ber between 0 (min. contrast)
and 99 (max. contrast). When
done, press
[ENTER]
.
Adjust Contrast
s
xx t
User You are now back at the User
Menu .
Analog Output
Contrast
Backlight