GE Voluson Swift Скачать руководство пользователя страница 22

Страница: 22 / 344

Label on the packing box

Figure 2-1 Package label

This label is printed on the packing box of the system to indicate the humidity, temperature

and air pressure condition for the storage and shipment.

2.2 Information for safe use

Please be advised that the electronic version of the Instructions for Use/addenda internally

displayed is provided for additional information purpose only. As official reference always

consult the printed document with the highest revision or the Instructions for Use/addenda

provided on the eDOC USB (Optional).

Warning
Do not use damaged or defective console or accessories. Failure to follow this precaution can

result in serious injury.

Warning
Only authorized personnel may perform modifications of the system.

Warning
Use of accessories, transducers and cables other than those specified or provided by the

manufacturer of this equipment could result in increased electromagnetic emissions or

decreased electromagnetic immunity of this equipment and result in improper operation.

Warning
Portable RF communications equipment (including peripherals such as antenna cables and

external antennas) should be used no closer than 30 cm (12 inches) to any part of the

Voluson™ SWIFT / Voluson SWIFT+, including cables specified by the manufacturer.

Otherwise, degradation of the performance of this equipment could result.

Caution
The use of the equipment outside the described conditions or intended use, and disregarding

safety related information is considered abnormal use. The manufacturer is not liable for injury

or damage caused by abnormal use. Any abnormal use will void the warranty of the

equipment.

Caution
Only use equipment provided by the system manufacturer GE ULTRASOUND KOREA, LTD. .

Caution
Some parts of the system or probes may have come into contact with latex. Accessories such

as probe sheaths may contain latex. There have been reports of severe allergic reactions to

medical devices containing latex (natural rubber). Operators are advised to identify latex-

sensitive patients and be prepared to treat allergic reactions promptly. Refer to FDA Medical

Alert MDA91-1.

Safety

2-8

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use

5831612-100 Revision 4

Содержание Voluson Swift

























































































































































































































































































































































Результаты поиска

Содержание Voluson Swift

Отзывы:

Похожие инструкции для Voluson Swift

Бренды по названию

Популярные бренды

GE Voluson Swift, Инструкция по эксплуатации

Результаты поиска

Содержание Voluson Swift

Отзывы:

Похожие инструкции для Voluson Swift

Бренды по названию

Популярные бренды